Honda Foreman Rubicon 500/520 License Plate Bracket

The official name is the Honda FourTrax Foreman Rubicon, although many owners simply call it a Honda Rubicon. Whichever name you use, finding a clean place to mount an ATV or OHV license plate can be difficult.

Attaching the plate directly to a plastic body panel may expose it to vibration and leave permanent holes. Universal mounts can require clamps, drilling or modifications that make the installation look improvised.

The Elite Engineering Honda Foreman Rubicon 500/520 license plate bracket mounts directly to the rear frame and holds a standard 4x7-inch motorcycle or OHV plate.

Is the Honda Rubicon a Foreman?

Yes. Honda’s official model name is the FourTrax Foreman Rubicon.

Honda also offers a standard FourTrax Foreman, so the two names should not be treated as completely interchangeable. The Foreman Rubicon is a distinct model family with features such as independent rear suspension and available automatic DCT.

You can view the current model information on Honda’s official FourTrax Foreman Rubicon page.

Owners may search for the machine using several names:

• Honda Foreman Rubicon

• Honda Rubicon

• Honda Rubicon 500

• Honda Rubicon 520

• Honda FourTrax Rubicon

• Honda FourTrax Foreman Rubicon

This bracket is intended for compatible Foreman Rubicon 500 and 520 applications shown on the product page.

Where Should the License Plate Be Mounted?

A practical location is at the rear of the ATV, close to the frame.

The plate should remain:

• Clearly visible from behind

• Secure during off-road riding

• Clear of the rear tires

• Away from suspension movement

• Separated from excessive exhaust heat

• Protected from trail obstacles when possible

• Out of the way of cargo and accessories

The Elite Engineering bracket positions the plate close to the rear frame rather than allowing it to hang unnecessarily far behind the ATV.

Fits Foreman Rubicon 500 and 520 Models

The bracket is designed for compatible:

• Honda Foreman Rubicon 500

• Honda Foreman Rubicon 520

The same bracket also fits several related Honda Foreman and Rancher models.

Rear grab bars, frame configurations and aftermarket accessories can vary. Compare your machine carefully with the product photos and fitment information before ordering.

Designed for a Standard 4x7 Plate

The bracket holds a standard 4x7-inch motorcycle, ATV or OHV license plate.

Plate dimensions and display requirements may vary by state, province and registration type. Measure your physical plate and confirm the current requirements where your ATV is registered.

For additional information, read What Size Is an ATV License Plate?.

Rear-Frame Installation

The bracket uses existing rear-frame mounting points to create a solid foundation for the plate.

Frame mounting provides several advantages:

• No drilling into the plastics

• No cutting or welding

• Reduced plate movement

• Stronger mounting foundation

• Clean factory-style appearance

• No permanent bodywork damage

• Better resistance to off-road vibration

The bracket sits close to the rear frame without relying on oversized universal clamps.

Why Not Bolt the Plate Directly to the Plastic?

The Foreman Rubicon’s plastic panels are lightweight and designed to flex.

When the license plate is mounted directly to a flexible panel, vibration becomes concentrated around the mounting holes. Repeated movement can eventually cause:

• Cracked plastic

• Enlarged mounting holes

• Loose fasteners

• Plate damage

• Unwanted rattling

• A missing license plate

A dedicated rear-frame bracket supports the plate without depending on the plastic bodywork.

For more advice, read How to Keep an ATV License Plate From Falling Off.

Black Anodized Aluminum Construction

The bracket is manufactured from aluminum and protected with a black anodized finish.

This construction provides:

• High strength without unnecessary weight

• Resistance to rust

• Protection against corrosion

• Durability in mud and water

• Resistance to weather exposure

• A clean appearance that matches the ATV

The black finish allows the bracket to blend naturally with the rear frame.

Stainless-Steel Hardware Included

The kit includes stainless-steel mounting hardware for a complete bolt-on installation.

Corrosion-resistant hardware is particularly important on an ATV because the rear of the machine is frequently exposed to:

• Mud

• Water

• Snow

• Road and trail debris

• Pressure washing

• Changing weather conditions

Inspect the hardware after the first few rides and periodically afterward.

General Installation Overview

Most owners can install the bracket in less than 15 minutes using basic hand tools.

A typical installation includes:

1. Park the Foreman Rubicon on a level surface.

2. Turn off the engine and allow the exhaust to cool.

3. Identify the rear-frame mounting location shown in the product photos.

4. Position the bracket against the frame.

5. Install the included stainless-steel hardware.

6. Tighten the bracket securely.

7. Attach the 4x7-inch license plate.

8. Check tire, suspension and exhaust clearance.

9. Confirm that the plate remains visible from behind.

Do not overtighten the hardware against the license plate. Excessive clamping force can distort the plate or damage the area around its mounting holes.

Check for Aftermarket Accessories

Rear-mounted accessories can affect bracket fitment.

Inspect the mounting area if your Foreman Rubicon has:

• An aftermarket grab bar

• Receiver hitch

• Rear bumper

• Cargo box

• Storage container

• Sprayer or spreader

• Modified exhaust

• Custom rack components

Compare the mounting area with the product photos before purchasing.

Built for Work and Trail Riding

The Honda Foreman Rubicon is frequently used for work, hunting, farming, snow removal and recreational trail riding.

A plate bracket installed on this machine must withstand:

• Engine vibration

• Rough terrain

• Mud and water

• Snow

• Branches and trail debris

• Repeated washing

• Normal cargo use

The anodized aluminum bracket provides a solid mounting surface designed for real ATV conditions.

Frequently Asked Questions

Is the Honda Rubicon considered a Foreman?

Yes. The official name is Honda FourTrax Foreman Rubicon. However, Honda also produces a standard FourTrax Foreman, so confirm which model you own when checking fitment.

Does the bracket fit the Foreman Rubicon 520?

Yes. The bracket is designed for compatible Honda Foreman Rubicon 520 models.

Does it fit the Foreman Rubicon 500?

Yes. Compatible Honda Foreman Rubicon 500 models are also included in the product fitment.

What size plate does it hold?

It holds a standard 4x7-inch motorcycle or OHV plate.

Does installation require drilling?

No. The bracket uses existing rear-frame mounting points without drilling into the ATV’s plastics.

Is hardware included?

Yes. Stainless-steel mounting hardware is included.

Does the same bracket fit other Honda ATVs?

Yes. The same product is designed for compatible Honda Foreman 500/520 and Rancher 350/420 models.

Will it fit with a receiver hitch?

That depends on the specific hitch and surrounding accessories. Compare your mounting area with the product photos to confirm clearance.

Does Elite Engineering ship to Canada?

Yes. Elite Engineering ships to both the United States and Canada.

Install a Proper Plate Mount on Your Foreman Rubicon

Zip ties, universal clamps and holes drilled into the plastic may hold a plate temporarily, but they do not provide the clean or durable installation most Foreman Rubicon owners want.

The Elite Engineering bracket creates a secure rear-frame mounting location while preserving the ATV’s original bodywork.

Shop the Honda Foreman Rubicon 500/520 license plate bracket.

Browse the complete selection of Honda ATV license plate mounts and brackets.