Polaris Sportsman & Scrambler 850/1000 V2 License Plate Bracket Guide
Share
If you are looking for a clean way to mount a 4 × 7-inch plate on a Polaris Sportsman 850/1000 or Scrambler 850/1000, the mounting location matters as much as the bracket itself. The rear of these machines can already be crowded by the exhaust, bumper, suspension, and accessories, so a model-specific rear-frame mount helps keep the installation centered and tidy.
The Elite Engineering Polaris Sportsman & Scrambler 850/1000 V2 License Plate Bracket is the latest version of our rear-frame mount. This guide explains its verified fitment, included hardware, plate size, and the checks to make before ordering or installing it.
What the V2 Polaris 850/1000 Bracket Is Designed For
The V2 bracket is designed for compatible Polaris Sportsman 850/1000 and Polaris Scrambler 850/1000 models. It provides a dedicated mounting point at the rear frame and positions the plate in a clean, centered location.
Because Polaris configurations can vary by model, year, exhaust, bumper, and installed accessories, the product listing does not claim one universal year range. Confirm your specific machine before ordering and compare its rear-frame area with the product photos.
What Is Different About the V2 Design?
V2 identifies this product as Elite Engineering’s latest version of the Sportsman and Scrambler 850/1000 bracket. The confirmed design details include a streamlined profile that sits behind the license plate, a black finish, and an engraved ELITE logo.
The bracket’s threaded plate-mounting holes accept the included plate bolts. That keeps the visible installation simple and eliminates the need to source separate plate fasteners. The design is intended to create a dedicated rear-frame mounting location rather than relying on a generic plate holder placed elsewhere on the machine.
Compatible Models and Plate Size
The current Shopify product listing identifies the following compatible model families:
- Polaris Sportsman 850
- Polaris Sportsman 1000
- Polaris Scrambler 850
- Polaris Scrambler 1000
The bracket is designed for a 4 × 7-inch ATV plate. Before installation, measure your actual plate and verify its mounting-hole spacing. Plate dimensions and hole placement should be checked directly rather than assumed from the registration type alone.
If you are unsure whether your plate is the expected size, see our guide to ATV and OHV license plate sizes.
What Comes With the V2 Bracket?
The product includes:
- One Elite Engineering V2 license plate bracket
- One mounting bolt
- Two plate bolts
The license plate and decorative plate frame shown in some applications are not included. The product part number is EE-POL8510-LPB-V2.
Checks to Make Before Ordering
Confirm the exact machine
Verify that the ATV is a compatible Sportsman 850/1000 or Scrambler 850/1000. Do not order by engine size alone if the rear-frame layout does not match the product photos.
Inspect the rear-frame mounting area
Look closely at the intended mounting location and compare it with the installed-product images. Factory and aftermarket equipment can change the available space behind the plate.
Check exhaust and bumper clearance
Inspect the distance between the mounting area and the exhaust components, rear bumper, and other accessories. The product listing specifically calls for checking these areas before installation.
Verify the plate
Confirm that the plate measures 4 × 7 inches and that its mounting holes align with the bracket. This is especially important if your local plate format differs from a typical OHV plate.
V2 License Plate Bracket Installation Overview
The following overview is limited to the mounting details confirmed by the product listing. It is not a substitute for the service information for your specific ATV.
- Confirm that your machine and rear-frame layout match the product photos.
- Check the surrounding exhaust, bumper, and accessory clearance before placing the bracket.
- Position the V2 bracket at the intended rear-frame mounting location.
- Install the bracket using the supplied mounting bolt.
- Place the 4 × 7-inch plate over the threaded mounting holes.
- Secure the plate using the two included plate bolts.
- Inspect the finished installation and confirm that the plate and bracket do not interfere with nearby components.
Use the correct tools and appropriate service information for your model. Do not force the bracket into a location that does not match the product photos or leaves inadequate clearance.
Why a Rear-Frame Plate Mount?
A dedicated rear-frame bracket provides a consistent mounting location and keeps the plate centered behind the machine. The V2 bracket’s profile is designed to remain behind the plate, allowing the finished plate installation—not extra mounting hardware—to be the most visible part.
A vehicle-specific layout also gives you clear items to verify before ordering: the machine family, rear-frame location, plate size, mounting-hole spacing, and component clearance. Those checks are more reliable than assuming a universal bracket will fit every rear setup.
Keeping the Plate Secure After Installation
After mounting any ATV plate, include the bracket and fasteners in your normal inspection routine. Look for looseness, contact with nearby components, or plate damage before riding. Our guide on how to keep an ATV license plate from falling off covers additional inspection points for off-road use.
Shop the Polaris Sportsman & Scrambler 850/1000 V2 Bracket
For current price, availability, full-size product photos, and the latest fitment information, visit the Polaris Sportsman & Scrambler 850/1000 V2 License Plate Bracket product page.
Before ordering, confirm your specific model and year, compare the rear mounting area with the product photos, and verify clearance around the exhaust, bumper, and any rear accessories.
Frequently Asked Questions
What models does the V2 bracket fit?
It is designed for compatible Polaris Sportsman 850/1000 and Polaris Scrambler 850/1000 models. Confirm the specific model, year, and rear-frame layout before ordering.
What size license plate does it hold?
The bracket is designed for a 4 × 7-inch ATV plate. Verify your plate dimensions and mounting-hole spacing before installation.
Is the mounting hardware included?
Yes. The product includes one mounting bolt and two plate bolts.
Are the license plate and plate frame included?
No. The license plate and plate frame are not included.
What should I check before installing it?
Confirm fitment, compare the mounting area with the product photos, verify the plate size and hole spacing, and check clearance around the exhaust, bumper, and other accessories.