How to Mount a License Plate on a Yamaha Banshee 350 (1987–2012)

Yamaha Banshee 350 License Plate Bracket With LED Marker Light

The Yamaha Banshee 350 remains one of the most recognizable sport ATVs ever built. However, mounting an ATV or OHV license plate to one can be difficult because the machine was not designed with an obvious factory plate location.

The Elite Engineering Yamaha Banshee 350 license plate bracket provides a clean rear mounting solution for every Banshee model from 1987 through 2012.

The kit includes an anodized aluminum bracket, mounting hardware and an LED marker light.

What Years Does the Banshee License Plate Bracket Fit?

The bracket fits Yamaha Banshee 350 models manufactured from:

1987 through 2012

This covers the complete production range, including later models sold outside the United States.

Owners should still compare their machine with the product photos, especially if the rear frame, grab bar or other components have been modified.

Where Do You Mount a License Plate on a Yamaha Banshee?

The bracket positions the license plate at the rear of the Banshee, creating a clean location that keeps the plate visible without attaching it directly to the plastic.

A good rear plate location should:

• Remain visible from behind

• Stay clear of the rear tires

• Avoid contact with the suspension

• Remain away from excessive exhaust heat

• Keep the plate close to the ATV

• Avoid interfering with the rider

• Protect the plate from trail obstacles when possible

The Elite Engineering bracket provides a dedicated mounting solution without making the plate look like an improvised addition.

Designed for a Standard 4x7 Plate

The bracket is designed to hold a standard 4x7-inch motorcycle or OHV license plate.

This smaller plate size is commonly issued for motorcycles and off-highway vehicles. Because plate dimensions can vary, measure your physical plate and confirm your local mounting requirements before ordering.

For more information, read our ATV license plate size and mounting guide.

LED Marker Light Included

Unlike a basic plate bracket, the Banshee kit includes an LED marker light.

The light gives the installation a more complete appearance and provides additional illumination at the rear of the machine. Wiring requirements can vary depending on how the Banshee’s electrical system is configured or modified.

Always connect the light to an appropriate circuit and verify correct voltage and polarity before applying power. If you are uncertain about the wiring, have it installed by someone familiar with motorcycle or ATV electrical systems.

Local rules regarding plate illumination and rear lighting can vary, so check the current requirements where the ATV will be operated.

Anodized Aluminum Construction

The bracket is manufactured from aluminum and protected with an anodized finish.

This construction provides several benefits:

• Lightweight design

• Resistance to rust

• Additional corrosion protection

• Strength for off-road use

• Clean finished appearance

• Better durability than many plastic or thin universal mounts

The compact bracket complements the Banshee’s design without adding an oversized structure to the rear of the ATV.

Why Not Drill the Plate Into the Plastic?

Attaching a plate directly to the plastic may look simple, but the body panels flex and vibrate while riding.

Over time, this movement can:

• Enlarge the mounting holes

• Crack the plastic

• Loosen the hardware

• Bend the license plate

• Allow the plate to fall off

• Leave permanent holes in valuable original plastics

This is especially important on older Banshees, where original plastics may be difficult or expensive to replace.

Using a dedicated aluminum bracket helps preserve the bodywork while providing a stronger mounting surface.

Better Than Zip Ties or a Universal Bracket

Zip ties are useful for temporary repairs, but they should not be treated as a permanent license plate mounting system. They can become brittle, loosen or break after exposure to sunlight, heat, mud and vibration.

Universal brackets can also create problems because they may require:

• Drilling

• Clamps

• Custom spacers

• Additional hardware

• Bending or cutting

• Trial-and-error positioning

A Banshee-specific bracket provides a cleaner solution and eliminates much of the fabrication associated with a universal mount.

Complete Mounting Kit

The Elite Engineering Banshee bracket includes:

• Anodized aluminum license plate bracket

• LED marker light

• Four mounting bolts

• Required bracket hardware

This gives owners a more complete solution without having to locate separate hardware or lighting components.

Frequently Asked Questions

Does the bracket fit every Yamaha Banshee 350?

It is designed for Yamaha Banshee 350 models from 1987 through 2012. Modified frames, aftermarket grab bars or other rear accessories could affect fitment.

What size plate does it hold?

The bracket is designed for a standard 4x7-inch motorcycle or OHV license plate.

Is the LED light included?

Yes. An LED marker light is included with the bracket kit.

Is mounting hardware included?

Yes. The kit includes the bracket hardware and four plate-mounting bolts.

Will the aluminum bracket rust?

Aluminum does not rust like untreated steel. The anodized finish also provides additional protection against corrosion and exposure.

Can I use it on a restored Banshee?

Yes, provided the machine retains the compatible mounting area. The bracket avoids drilling holes into the original plastic, making it especially useful for clean or restored machines.

A Clean Plate Mount for a Classic Sport ATV

A Yamaha Banshee deserves a mounting solution that looks intentional. Drilled plastics, zip ties and oversized universal brackets can distract from the machine and leave the plate vulnerable to damage.

The Elite Engineering bracket provides a durable 4x7 mounting surface, anodized aluminum construction, included hardware and an LED marker light in one complete kit.

Shop the Yamaha Banshee 350 license plate bracket with LED marker light.

You can also browse all Yamaha ATV license plate mounts and brackets.