No Place to Mount a Flag on Your Electric Dirt Bike? Here's Our Rear Axle Solution
There’s a common problem when adding a safety flag to an electric dirt bike: the bike may have no obvious, sturdy place to mount it. You want the flag out back where it belongs—but you probably don't want a bulky clamp, a loose mount or a hole drilled through your new fender.
That's the problem behind Elite Engineering's new electric dirt bike rear axle flag whip mount. Instead of asking riders to improvise a place for a flag, we've designed a compact aluminum bracket around the mounting area at the right-rear axle on select compatible e-moto bikes.
Coming Soon: See our Electric Dirt Bike Flag Whip Mount, photos and full bike compatibility list. This product is a preview and is not currently available for purchase or preorder.
Why Is It So Hard to Mount a Flag on an Electric Dirt Bike?
Electric dirt bikes offer compact frames, narrow tail sections and minimal bodywork. Those features are great for riding, but can leave very few convenient places to install a traditional safety flag mount. Universal clamps may need a suitable exposed tube; a fender mount may involve drilling and reinforcement; and a flag mounted in the wrong location can interfere with the bike.
That matters when you're getting ready for dunes or other riding areas where a visibility flag is useful or required. Having a flag pole is only half the problem. You also need a dedicated mounting point that fits the motorcycle.
Our Solution: A Low-Profile Rear Axle Whip Mount
We designed the Elite Engineering bracket to sit at the right-rear swingarm axle area on the compatible bikes listed below. The mount combines the rear-axle attachment opening, a recessed axle-nut pocket and a separate upright hole for attaching a suitable whip-flag holder.
By placing the mounting point at the axle area, the bracket offers an alternative to drilling the rear plastics or adding a large external clamp on the appropriate motorcycle. The finished installation still depends on correct axle hardware seating, sufficient thread engagement and clearances.
Built for the Job, Not Just for the Look
- CNC-machined 6061 aluminum: A precision-made, lightweight bracket rather than a large universal clamp.
- Clear anodized finish: Helps protect the aluminum surface from corrosion and wear while showing off the machined design.
- Recessed axle-nut pocket: Integrated into the mounting shape for the intended rear-axle hardware.
- Separate whip mounting hole: A dedicated point for the correct flag holder or compatible whip hardware.
- Clean appearance: A compact bracket with Elite Engineering branding intended to fit naturally near the rear swingarm end.
Designed for More Than One Electric Dirt Bike
We didn't want this to be a bracket aimed at only one brand. The Coming Soon fitment list includes select 15 mm rear-axle configurations across several electric dirt bike families:
- Arctic Leopard: XE Pro, XE Pro S, XE Pro R, XE Pro Enduro and XE Pro MX
- 79Bike: Falcon GT
- Talaria: Sting MX5
- Altis: 2025 Sigma and 2025 Sigma MX with the 15 mm rear axle
- Yozma: IN10 Pro
- X-PRO: DRAX X 72V
- Eskute and KOVO: RT X
- Nexvey: Storm
- Skeri: EDB01 and Voltalon
Important: A rear-axle diameter alone does not guarantee fitment. Verify your exact bike version, right-rear swingarm end, fastener recess and clearances before installation. This mount is not intended as a universal part for every electric dirt bike.
It's About Visibility—Not Just Sand Dunes
Many riders first think about whip flags because of sand dunes and their site-specific safety flag rules. But a properly selected visibility flag may also be useful in other off-road riding situations where additional visibility is desirable. Our product is a flag mounting solution, not a claim that one flag, height or configuration meets every jurisdiction's rules.
Check the requirements for your riding destination. A compliant setup depends on the flag color, flag dimensions, installed height and secure mounting—not the bracket alone.
What Comes With the Mount?
The planned product is one Elite Engineering aluminum flag whip mounting bracket. The safety flag and whip pole are not included. The whip holder's mounting hardware must also be matched to the bracket before use.
When installing any rear axle accessory, follow the bike manufacturer's axle procedure and torque specification. Confirm that the axle nut seats properly and that the bracket and complete pole assembly will not contact the tire, chain, brakes or suspension through normal movement.
See the New Electric Dirt Bike Flag Mount Before Launch
We're sharing the design early so riders can see the actual product, its anodized finish and the models it was designed for. The first production units are not yet listed as available, and we're not accepting preorders.
View the Elite Engineering Electric Dirt Bike Flag Whip Mount — Coming Soon
Want to learn more about other mounting choices? Read our Electric Dirt Bike Flag Mount Guide for a comparison of rear-axle, fender and frame mounting methods.