Polaris Sportsman 700 & 800 License Plate Bracket: Rear 4x7 Mount Guide
Share
Polaris Sportsman 700 & 800 License Plate Bracket: Clean Rear 4x7 Mount
If you need a clean, secure way to mount a license plate on a Polaris Sportsman 700 or Sportsman 800, a model-specific rear bracket can be a much better option than drilling plastic, using zip ties, or adapting a universal clamp.
Elite Engineering's Polaris Sportsman License Plate Bracket is designed for compatible Sportsman 400, 450, 500, 570, 600, 700 and 800 models and holds a standard 4x7-inch OHV or motorcycle-style plate.
Why the Sportsman 700 and 800 Need a Better Plate-Mounting Solution
Polaris Sportsman ATVs were built first and foremost for utility and trail use, so the rear of the machine is usually occupied by the rack, suspension, bodywork, bumper, and accessories. That does not always leave an obvious place for a license plate.
Owners often end up using universal brackets, clamps, homemade mounts, or even drilling into bodywork. A dedicated rear-facing bracket gives the plate a rigid location while keeping the installation cleaner and easier to service later.
Rear-Facing 4x7 License Plate Mount
The Elite Engineering bracket is designed to position the plate facing straight back from the ATV. It is made from anodized aluminum and uses compatible existing rear-frame mounting points rather than requiring a permanent modification to the machine.
- Fits compatible Polaris Sportsman 700 and 800 models
- Also fits compatible Sportsman 400, 450, 500, 570 and 600 models
- Designed for a standard 4x7-inch license plate
- Rear-facing mounting position
- Bolt-on installation
- No drilling or cutting required
- Mounting hardware included
- Black anodized aluminum construction
Why Use a Model-Specific Bracket Instead of a Universal Mount?
Universal license plate mounts are designed to work on many different machines, which means they often depend on clamps, extra hardware, or mounting locations that were not intended specifically for the ATV.
A model-specific bracket is designed around the available mounting points on compatible Sportsman machines. That generally creates a cleaner installation with fewer improvised parts.
How the Sportsman 700/800 Bracket Installs
Installation is straightforward and can normally be handled with basic hand tools.
- Compare your ATV's rear-frame mounting area with the product photos.
- Position the bracket at the compatible rear-frame mounting location.
- Install the supplied mounting hardware.
- Attach your 4x7-inch plate to the bracket.
- Check clearance around the suspension, bumper, exhaust area, and rear accessories.
No drilling, cutting, or permanent modification is required on compatible applications.
Check Your Rear Bumper and Accessories Before Ordering
Rear-frame configurations and accessories can vary between machines. Aftermarket bumpers, storage boxes, suspension changes, and other rear-mounted accessories can change the available clearance around the mounting location.
Before ordering, compare your ATV with the mounting photos on the product page. If your rear setup looks significantly different, contact Elite Engineering before ordering so the mounting area can be checked.
What Size License Plate Does It Hold?
The bracket is designed around a standard 4x7-inch motorcycle or OHV-style license plate. This compact size works well on an ATV because it provides a solid mounting surface without taking up a large amount of space behind the machine.
Sportsman 700 vs. 800: Does the Same Bracket Work?
The Elite Engineering rear-facing bracket is listed for compatible Sportsman 700 and Sportsman 800 applications, along with several other Sportsman models. Because individual rear-frame, trim, and accessory configurations can differ, fitment should always be confirmed by comparing your machine with the product photos before ordering.
Rear-Facing vs. Side-Mount
Elite Engineering has offered both rear-facing and side-mount Sportsman brackets. The rear-facing version is the main design we recommend because it keeps the plate directly behind the ATV and provides a clean, straightforward appearance.
A limited number of the older Sportsman side-mount brackets may still be available while supplies last.
Shop the Polaris Sportsman 700/800 License Plate Bracket
See current availability, mounting photos, dimensions, hardware, and full fitment information here:
Polaris Sportsman License Plate Bracket – Rear 4x7 Mount for 400/450/500/570/600/700/800
Related Polaris Sportsman Guides
- Polaris Sportsman 500 License Plate Bracket Guide
- Polaris Sportsman 450 License Plate Bracket Guide
- Polaris Sportsman 570 License Plate Mounting Guide
- Polaris Sportsman 570 vs. 600 Guide
Frequently Asked Questions
Does the Sportsman 700/800 bracket require drilling?
No. On compatible applications, it is designed to use existing rear-frame mounting points.
What size plate fits the bracket?
The bracket is designed for a standard 4x7-inch OHV or motorcycle-style license plate.
Is mounting hardware included?
Yes. Mounting hardware is included with the bracket.
Does the same bracket fit both Sportsman 700 and Sportsman 800?
The product is listed for compatible Sportsman 700 and 800 models. Because trim, bumper, and accessory configurations can vary, compare your ATV with the product photos before ordering.
Can an aftermarket bumper affect fitment?
Yes. Rear bumpers and other accessories can change available clearance around the mounting location.